Micro Reducer Tee

Micro Reducer Tee

Features

Flat end, burrless，seamless joint without burr，ensure uniform pipe thickness

Spherical design, smoother fluid flow, eliminate the dead angle

High purity application processing
BA：Surface finish up to 0.25 μm
EP：Surface finish up to 0.13 μm

Sharp Corner Deburring，effectiuely prevent accidental, injury to people or parts

Dimensions

Ordering Information

Fitting Type	O.D. 1	Pipe Thickness 1	O.D. 2	Pipe Thickness 2	Model Number	A	B	F	L	Preset Pressure
Fractional	3/8 in. 1/2 in. 1/2 in.	0.035 in. 0.049 in. 0.049 in.	1/4 in. 1/4 in. 3/8 in.	0.035 in. 0.035 in. 0.035 in.	SL-MRT-6-4 SL-MRT-8-4 SL-MRT-8-6	0.94 in. ( 23.9 mm ) 1.06 in. ( 26.9 mm ) 1.06 in. ( 26.9 mm )	0.25 in. ( 6.4 mm ) 0.25 in. ( 6.4 mm ) 0.25 in. ( 6.4 mm )	7/16 in. 9/16 in. 9/16 in.	0.47 in. ( 11.9 mm ) 0.53 in. ( 13.5 mm ) 0.53 in. ( 13.5 mm )	3300 psi ( 227 bar ) 3700 psi ( 254 bar ) 3000 psi ( 207 bar )
Metric	10 mm 12 mm 12 mm	1.0 mm 1.0 mm 1.0 mm	6 mm 6 mm 8 mm	1.0 mm 1.0 mm 1.0 mm	SL-MRT-10M-6M SL-MRT-12M-6M SL-MRT-12M-8M	23.8 mm ( 0.94 in. ) 26.9 mm ( 1.06 in. ) 26.9 mm ( 1.06 in. )	6.4 mm ( 0.25 in. ) 6.4 mm ( 0.25 in. ) 6.4 mm ( 0.25 in. )	7/16 in. 9/16 in. 9/16 in.	11.9 mm ( 0.47 in. ) 13.5 mm ( 0.53 in. ) 13.5 mm ( 0.53 in. )	24 MPa ( 3483 psi ) 20 MPa ( 2900 psi ) 20 MPa ( 2900 psi )